A Ruthenophosphanorcaradiene as a Synthon for an Ambiphilic Metallophosphinidene.

Reaction of the ruthenium carbene complex Cp*(IPr)RuCl (1) (IPr = 1,3-bis(Dipp)imidazol-2-ylidene; Dipp = 2,6-diisopropylphenyl) with sodium phosphaethynolate (NaOCP) led to intramolecular dearomatization of one of the Dipp substituents on the Ru-bound carbene to afford a Ru-bound phosphanorcaradiene, 2. Computations by DFT reveal a transition state characterized by a concerted process whereby CO migrates to the Ru center as the P atom adds to the π system of the aryl group. The phosphanorcaradiene possesses ambiphilic properties and reacts with both nucleophilic and electrophilic substrates, resulting in rearomatization of the ligand aryl group with net P atom transfer to give several unusual metal-bound, P-containing main-group moieties. These new complexes include a metallo-1-phospha-3-azaallene (Ru─P═C═NR), a metalloiminophosphanide (Ru─P═N─R), and a metallophosphaformazan (Ru─P(═N─N═CPh2)2). Reaction of 2 with the carbene 2,3,4,5-tetramethylimidazol-2-ylidene (IMe4) produced the corresponding phosphaalkene DippP═IMe4.

ß

For the first time, the (d,^{2}He) reaction was successfully used in inverse kinematics to extract the Gamow-Teller transition strength in the ß^{+} direction from an unstable nucleus. The new technique was made possible by the use of an active-target time-projection chamber and a magnetic spectrometer, and opens a path to addressing a range of scientific challenges, including in astrophysics and neutrino physics. In this Letter, the nucleus studied was ^{14}O, and the Gamow-Teller transition strength to ^{14}N was extracted up to an excitation energy of 22 MeV. The data were compared to shell-model and state-of-the-art coupled-cluster calculations. Shell-model calculations reproduce the measured Gamow-Teller strength distribution up to about 15 MeV reasonably well, after the application of a phenomenological quenching factor. In a significant step forward to better understand this quenching, the coupled-cluster calculation reproduces the full strength distribution well without such quenching, owing to the large model space, the inclusion of strong correlations, and the coupling of the weak interaction to two nucleons through two-body currents.

High species richness in the lichen genus Peltigera (Ascomycota, Lecanoromycetes): 34 species in the dolichorhizoid and scabrosoid clades of section Polydactylon, including 24 new to science.

Applying molecular methods to fungi establishing lichenized associations with green algae or cyanobacteria has repeatedly revealed the existence of numerous phylogenetic taxa overlooked by classical taxonomic approaches. Here, we report taxonomical conclusions based on multiple species delimitation and validation analyses performed on an eight-locus dataset that includes world-wide representatives of the dolichorhizoid and scabrosoid clades in section Polydactylon of the genus Peltigera. Following the recommendations resulting from a consensus species delimitation approach and additional species validation analysis (BPP) performed in this study, we present a total of 25 species in the dolichorhizoid clade and nine in the scabrosoid clade, including respectively 18 and six species that are new to science and formally described. Additionally, one combination and three varieties (including two new to science) are proposed in the dolichorhizoid clade. The following 24 new species are described: P. appalachiensis, P. asiatica, P. borealis, P. borinquensis, P. chabanenkoae, P. clathrata, P. elixii, P. esslingeri, P. flabellae, P. gallowayi, P. hawaiiensis, P. holtanhartwigii, P. itatiaiae, P. hokkaidoensis, P. kukwae, P. massonii, P. mikado, P. nigriventris, P. orientalis, P. rangiferina, P. sipmanii, P. stanleyensis, P. vitikainenii and P. willdenowii; the following new varieties are introduced: P. kukwae var. phyllidiata and P. truculenta var. austroscabrosa; and the following new combination is introduced: P. hymenina var. dissecta. Each species from the dolichorhizoid and scabrosoid clades is morphologically and chemically described, illustrated, and characterised with ITS sequences. Identification keys are provided for the main biogeographic regions where species from the two clades occur. Morphological and chemical characters that are commonly used for species identification in the genus Peltigera cannot be applied to unambiguously recognise most molecularly circumscribed species, due to high variation of thalli formed by individuals within a fungal species, including the presence of distinct morphs in some cases, or low interspecific variation in others. The four commonly recognised morphospecies: P. dolichorhiza, P. neopolydactyla, P. pulverulenta and P. scabrosa in the dolichorhizoid and scabrosoid clades represent species complexes spread across multiple and often phylogenetically distantly related lineages. Geographic origin of specimens is often helpful for species recognition; however, ITS sequences are frequently required for a reliable identification. Citation: Magain N, Miadlikowska J, Goffinet B, et al. 2023. High species richness in the lichen genus Peltigera (Ascomycota, Lecanoromycetes): 34 species in the dolichorhizoid and scabrosoid clades of section Polydactylon, including 24 new to science. Persoonia 51: 1-88. doi: 10.3767/persoonia.2023.51.01.

Constraining the

The ^{30}P(p,γ)^{31}S reaction plays an important role in understanding the nucleosynthesis of A≥30 nuclides in oxygen-neon novae. The Gaseous Detector with Germanium Tagging was used to measure ^{31}Cl ß-delayed proton decay through the key J^{π}=3/2^{+}, 260-keV resonance. The intensity I_{ßp}^{260}=8.3_{-0.9}^{+1.2}×10^{-6} represents the weakest ß-delayed, charged-particle emission ever measured below 400 keV, resulting in a proton branching ratio of Γ_{p}/Γ=2.5_{-0.3}^{+0.4}×10^{-4}. By combining this measurement with shell-model calculations for Γ_{γ} and past work on other resonances, the total ^{30}P(p,γ)^{31}S rate has been determined with reduced uncertainty. The new rate has been used in hydrodynamic simulations to model the composition of nova ejecta, leading to a concrete prediction of ^{30}Si:^{28}Si excesses in presolar nova grains and the calibration of nuclear thermometers.

Non-invasive metabolomics biomarkers of production efficiency and beef carcass quality traits.

The inter-cattle growth variations stem from the interaction of many metabolic processes making animal selection difficult. We hypothesized that growth could be predicted using metabolomics. Urinary biomarkers of cattle feed efficiency were explored using mass spectrometry-based untargeted and targeted metabolomics. Feed intake and weight-gain was measured in steers (n = 75) on forage-based growing rations (stage-1, 84 days) followed by high-concentrate finishing rations (stage-2, 84 days). Urine from days 0, 21, 42, 63, and 83 in each stage were analyzed from steers with the greater (n = 14) and least (n = 14) average-daily-gain (ADG) and comparable dry-matter-intake (DMI; within 0.32 SD of the mean). Steers were slaughtered after stage-2. Adjusted fat-thickness and carcass-yield-grade increased in greater-ADG-cattle selected in stage-1, but carcass traits did not differ between ADG-selected in stage-2. Overall 85 untargeted metabolites segregated greater- and least-ADG animals, with overlap across diets (both stages) and breed type, despite sampling time effects. Total 18-bile acids (BAs) and 5-steroids were quantified and associated with performance and carcass quality across ADG-classification depending on the stage. Stepwise logistic regression of urinary BA and steroids had > 90% accuracy identifying efficient-ADG-steers. Urine metabolomics provides new insight into the physiological mechanisms and potential biomarkers for feed efficiency.

Structure and Bonding in a Diamond-Shaped Tin Cluster Possessing a cyclo-Sn4 Core.

A tetrameric cluster composed entirely of (aryl)Sn units, [DMPSn]4 (DMP=2,6-dimesitylphenyl), has been prepared by reduction of [DMPSnCl]2 with a variety of reductants. This cluster was characterized in solution by multinuclear NMR spectroscopies, as well as in the solid-state by single crystal X-ray diffraction analysis. This species is stereochemically nonrigid in solution and possesses a cyclo-Sn4 core whose DMP substituents are equivalent at higher temperatures. The solid-state molecular structure is remarkably unsymmetrical and possesses a nearly planar cyclo-Sn4 core. The DMP substituents are arranged such that three are approximately coplanar, while one is nearly perpendicular to the cyclo-Sn4 core. Density functional theory calculations for a [PhSn]4 model system show that this distorted geometry about the cyclo-Sn4 core maximizes σ-bonding between the Sn centers in a manner reminiscent of trans-bent bonding in the heavy group 14 analogues of alkenes and alkynes.

The Cancer Care Index: A Novel Metric to Assess Overall Performance of a Pediatric Oncology Program.

OBJECTIVE: Childhood cancer metrics are currently primarily focused on survival rates and late effects of therapy. Our objectives were to design and test a metric that reflected overall quality and safety performance, across all cancer types, of an oncology-bone marrow transplant service line and to use the metric to drive improvement. METHOD: The Cancer Care Index (CCI) aggregates adverse safety events and missed opportunities for best practices into a composite score that reflects overall program performance without regard to cancer type or patient outcome. Fifteen domains were selected in 3 areas as follows: (1) treatment-related quality and safety, (2) provision of a harm-free environment, and (3) psychosocial support. The CCI is the aggregate number of adverse events or missed opportunities to provide quality care in a given time frame. A lower CCI reflects better care and improved overall system performance. Multidisciplinary microsystem-based teams addressed specific aims for each domain. The CCI was widely followed by all team members, particularly frontline providers. RESULTS: The CCI was easy to calculate and deploy and well accepted by the staff. The annual CCI progressively decreased from 278 in 2012 to 160 in 2014, a 42% reduction. Improvements in care were realized across most index domains. Multiple new initiatives were successfully implemented. CONCLUSIONS: The CCI is a useful metric to document performance improvement across a broad range of domains, regardless of cancer type. By the use of quality improvement science, progressive reduction in CCI has occurred over a 3-year period.

Iterative Supervised Principal Component Analysis Driven Ligand Design for Regioselective Ti-Catalyzed Pyrrole Synthesis.

The rational design of catalysts remains a challenging endeavor within the broader chemical community owing to the myriad variables that can affect key bond-forming events. Designing selective catalysts for any reaction requires an efficient strategy for discovering predictive structure-activity relationships. Herein, we describe the use of iterative supervised principal component analysis (ISPCA) in de novo catalyst design. The regioselective synthesis of 2,5-dimethyl-1,3,4-triphenyl-1H-pyrrole (C) via a Ti-catalyzed formal [2 + 2 +1] cycloaddition of phenylpropyne and azobenzene was targeted as a proof of principle. The initial reaction conditions led to an unselective mixture of all possible pyrrole regioisomers. ISPCA was conducted on a training set of catalysts, and their performance was regressed against the scores from the top three principal components. Component loadings from this PCA space and k-means clustering were used to inform the design of new test catalysts. The selectivity of a prospective test set was predicted in silico using the ISPCA model, and optimal candidates were synthesized and tested experimentally. This data-driven predictive-modeling workflow was iterated, and after only three generations the catalytic selectivity was improved from 0.5 (statistical mixture of products) to over 11 (>90% C) by incorporating 2,6-dimethyl-4-(pyrrolidin-1-yl)pyridine as a ligand. The origin of catalyst selectivity was probed by examining ISPCA variable loadings in combination with DFT modeling, revealing that ligand lability plays an important role in selectivity. A parallel catalyst search using multivariate linear regression (MLR), a popular approach in catalysis informatics, was also conducted in order to compare these strategies in a hypothetical catalyst scouting campaign. ISPCA appears to be more robust and predictive than MLR when sparse training sets are used that are representative of the data available during the early search for an optimal catalyst. The successful development of a highly selective catalyst without resorting to long, stochastic screening processes demonstrates the inherent power of ISPCA in de novo catalyst design and should motivate the general use of ISPCA in reaction development.

Ti-catalyzed ring-opening oxidative amination of methylenecyclopropanes with diazenes.

The ring-opening oxidative amination of methylenecyclopropanes (MCPs) with diazenes catalyzed by py3TiCl2(NR) complexes is reported. This reaction selectively generates branched α-methylene imines as opposed to linear α,ß-unsaturated imines, which are difficult to access via other methods. Products can be isolated as the imine or hydrolyzed to the corresponding ketone in good yields. Mechanistic investigation via density functional theory suggests that the regioselectivity of these products results from a Curtin-Hammett kinetic scenario, where reversible ß-carbon elimination of a spirocyclic [2 + 2] azatitanacyclobutene intermediate is followed by selectivity-determining ß-hydrogen elimination of the resulting metallacycle. Further functionalizations of these branched α-methylene imine products are explored, demonstrating their utility as building blocks.

Decreasing Radiograph Errors in Pediatric Sports Medicine Clinic.

BACKGROUND: Radiographs are frequently ordered for general musculoskeletal complaints in the outpatient setting. However, incorrect laterality, incorrect location, or unnecessary radiographs have been reported as errors in our clinics. This quality improvement (QI) project aimed to reduce incorrect duplicate radiographs in outpatient pediatric sports medicine clinic. The overall global goal was to stop unnecessary radiation exposure in our pediatric patients. METHODS: Using QI methodology, we evaluated the current clinic flow, the process of ordering radiographs, and the completion of radiographs at the main sports medicine outpatient clinic. Staff communication, staff education, and patient participation were identified as the prominent gaps in our clinic process. We implemented interventions using progressive biweekly Plan-Do-Study-Act (PDSA) cycles to promote change and to reduce our radiographic errors. RESULTS: Retrospective baseline data demonstrated baseline errors of 9% (10/106) in the main outpatient clinic. After 6 months of PDSA cycles, we found no duplicate errors. Highly successful interventions included radiograph screening survey for families, staff education, and improved staff communication. The project was expanded to a second outpatient clinic with baseline errors of 6% (4/64). After 2 months of PDSA cycles, no duplicate errors were found. CONCLUSION: Our goal was to reduce incorrect duplicate radiographs in outpatient sports medicine clinic and limit unnecessary radiation exposure in our pediatric patients. A reduction in duplicate errors at 2 clinics occurred using the Institute for Healthcare Improvement model to facilitate change. Effective communication between physicians, clinical athletic trainers, radiology technologists, patients, and families drove the success of this quality improvement initiative.

Decreasing Seizure Treatment Time Through Quality Improvement Reduces Critical Care Utilization.

BACKGROUND: Rapid, effective treatment for status epilepticus reduces associated morbidity and mortality, yet medication delivery remains slow in many hospitalized patients. We utilized quality improvement (QI) methodology to improve treatment times for hospitalized children with status epilepticus. We hypothesized rapid initial seizure treatment would decrease seizure morbidity. METHODS: We utilized QI and statistical process control analysis in a nonintensive care setting within a tertiary care pediatric hospital. We performed Plan-Do-Study-Act cycles including (1) revising the nursing process for responding to seizures, (2) emphasizing intranasal midazolam over intravenous lorazepam, (3) relocating medications and supplies, (4) developing documentation tools and reinforcing correct processes, (5) developing and disseminating an online education module for residents and nurse practitioners, and (6) completing standardization to intranasal midazolam. RESULTS: Seventeen months after starting the project, 66 seizures had been treated with a benzodiazepine in a median (p25-p75) time of 7.5 minutes (5 to 10), decreased from a baseline of 14 minutes (8-30) (P = 0.01). The proportion of patients receiving a benzodiazepine in 10 minutes or less improved from 39% to 79%. The proportion of patients transferred to intensive care decreased from a baseline of 39% to 9% (P < 0.005), resulting in an estimated $2.1 million in mitigated hospital charges. Significant harm did not occur during the implementation of these interventions. CONCLUSIONS: Children with status epilepticus were treated with benzodiazepines more rapidly and effectively following implementation of QI methodology. These interventions reduced utilization of critical care and mitigated hospital charges.

Predicting aged pork quality using a portable Raman device.

The utility of Raman spectroscopic signatures of fresh pork loin (1 d & 15 d postmortem) in predicting fresh pork tenderness and slice shear force (SSF) was determined. Partial least square models showed that sensory tenderness and SSF are weakly correlated (R2 = 0.2). Raman spectral data were collected in 6 s using a portable Raman spectrometer (RS). A PLS regression model was developed to predict quantitatively the tenderness scores and SSF values from Raman spectral data, with very limited success. It was discovered that the prediction accuracies for day 15 post mortem samples are significantly greater than that for day 1 postmortem samples. Classification models were developed to predict tenderness at two ends of sensory quality as "poor" vs. "good". The accuracies of classification into different quality categories (1st to 4th percentile) are also greater for the day 15 postmortem samples for sensory tenderness (93.5% vs 76.3%) and SSF (92.8% vs 76.1%). RS has the potential to become a rapid on-line screening tool for the pork producers to quickly select meats with superior quality and/or cull poor quality to meet market demand/expectations.

Endocannabinoid concentrations in plasma during the finishing period are associated with feed efficiency and carcass composition of beef cattle.

We previously have shown that plasma concentrations of endocannabinoids (EC) are positively correlated with feed efficiency and leaner carcasses in finishing steers. However, whether the animal growth during the finishing period affects the concentration of EC is unknown. The objective of this study was to quantify anandamide (AEA) and 2-arachidonyl glycerol (2-AG) in plasma during different stages of the finishing period and identify possible associations with production traits and carcass composition in beef calves. Individual DMI and BW gain were measured on 236 calves ( = 127 steers and = 109 heifers) for 84 d on a finishing ration. Blood samples were collected on d 0 (early), 42 (mid), and 83 (late) of days on study (DOS). Cattle were slaughtered 44 d after the feeding study. Plasma concentration of AEA at 0 DOS was indirectly associated with the G:F ( < 0.01) and directly associated with residual feed intake (RFI; < 0.05) in steers. In contrast, plasma concentration of AEA at 83 DOS was directly associated with the G:F and indirectly associated RFI in heifers and steers ( < 0.01). In addition, AEA concentration at 42 and 83 DOS was positively associated with ADG and DMI ( < 0.01) in heifers and steers. Furthermore, 2-AG concentration at 42 DOS was positively associated with ADG in steers ( < 0.01) and heifers ( < 0.10). Plasma concentration of AEA was positively associated ( < 0.05) with HCW, USDA-calculated yield grade, and 12th-rib fat thickness in heifers, whereas no associations were found in steers. In contrast, 2-AG concentration was not associated with any carcass traits. These results provide evidence that circulating EC change during animal growth and that AEA concentration may be a useful predictor of growth and feed efficiency and, in females, of carcass attributes.

Generation of TiII Alkyne Trimerization Catalysts in the Absence of Strong Metal Reductants.

Low-valent TiII species have typically been synthesized by the reaction of TiIV halides with strong metal reductants. Herein we report that TiII species can be generated simply by reacting TiIV imido complexes with 2 equiv of alkyne, yielding a metallacycle that can reductively eliminate pyrrole while liberating TiII. In order to probe the generality of this process, TiII-catalyzed alkyne trimerization reactions were carried out with a diverse range of TiIV precatalysts.

Animal physiology and genetic aspects of ryegrass staggers in grazing sheep.

Ryegrass staggers (RGS) is a metabolic disease of herbivores, caused by the ingestion of perennial ryegrass (Lolium perenne L.) containing a fungal endophyte (Neotyphodium lolii) which produces a tremorgenic toxin, lolitrem B. RGS has a major economic impact for agriculture in New Zealand as well as internationally. Management of RGS in grazing sheep can be problematic, and there is an incomplete knowledge of the interaction between the toxin and the grazing animal. This review is focused on recent advances in understanding the molecular physiology of RGS in the affected animal as well as the influence of animal genetics on the degree of susceptibility to RGS. Investigations to date suggest that the primary target for toxin is the large conductance, calcium-activated, potassium (BK) channel, resulting in disruption of neuromuscular junction signalling. Genetic investigation has established the existence of genes influencing resistance to RGS, however their identity has not been confirmed and their impact has not been established. Studies to date suggest that a multi-gene selection approach will be necessary in order to develop an effective selection tool for use in the agricultural industries.

A Population Intervention to Improve Outcomes in Children With Medical Complexity.

BACKGROUND AND OBJECTIVES: Children with medical complexity experience frequent interactions with the medical system and often receive care that is costly, duplicative, and inefficient. The growth of value-based contracting creates incentives for systems to improve their care. This project was designed to improve the health, health care value, and utilization for a population-based cohort of children with neurologic impairment and feeding tubes. METHODS: A freestanding children's hospital and affiliated accountable care organization jointly developed a quality improvement initiative. Children with a percutaneous feeding tube, a neurologic diagnosis, and Medicaid, were targeted for intervention within a catchment area of >300 000 children receiving Medicaid. Initiatives included standardizing feeding tube management, improving family education, and implementing a care coordination program. RESULTS: Between January 2011 and December 2014, there was an 18.0% decrease (P < .001) in admissions and a 31.9% decrease (P < .001) in the average length of stay for children in the cohort. Total inpatient charges were reduced by $11 764 856. There was an 8.2% increase (P < .001) in the percentage of children with weights between the fifth and 95th percentiles. The care coordination program enrolled 58.3% of the cohort. CONCLUSIONS: This population-based initiative to improve the care of children with medical complexity showed promising results, including a reduction in charges while improving weight status and implementing a care coordination program. A concerted institutional initiative, in the context of an accountable care organization, can be part of the solution for improving outcomes and health care value for children with medical complexity.

Effect of hot carcass weight on loin, ham, and belly quality from pigs sourced from a commercial processing facility,.

The objective was to determine the predictive abilities of HCW for loin, ham, and belly quality of 7,684 pigs with carcass weights ranging from 53.2 to 129.6 kg. Carcass composition, subjective loin quality, and ham face color were targeted on all carcasses, whereas in-plant instrumental loin color and belly quality were assessed on 52.0 and 47.5% of carcasses, respectively. Loin chop slice shear force (SSF), cured ham quality, and adipose iodine value (IV) were evaluated on at least 10% of the population. The slope of regression lines and coefficients of determination between HCW and quality traits were computed using PROC REG of SAS and considered significant at ≤ 0.05. As HCW increased, boneless loins became darker and redder, evidenced by lower L* (ß = -0.0243, < 0.001) and greater a* values (ß = 0.0106, < 0.001); however, HCW accounted for only ≤0.80% of the variability in loin L* and a* values. Similarly, subjective loin color score (ß = 0.0024, < 0.001) increased with increasing carcass weight, but subjective marbling score was not affected by HCW (ß = -0.0022, = 0.06). After 20 d of aging, HCW explained only 0.98% of the variability in loin L* values (ß = -0.0287, < 0.01). Heavier carcasses had lower SSF values (ß = -0.1269, < 0.001) of LM chops, although HCW explained only 4.46% of the variability in SSF. Although heavier carcasses produced loins that exhibited lower ultimate pH values (ß = -0.0018, < 0.001), HCW explained only 1.23% of the variability in ultimate loin pH. Interestingly, cook loss decreased (ß = -0.0521, < 0.001) as HCW increased, with HCW accounting for 5.60% of the variability in cook loss. Heavier carcasses resulted in darker, redder ham face color ( < 0.001), but HCW accounted for only ≤2.87% of the variability in ham face L* values and 0.47% of the variability in a* values. Heavier carcasses produced thicker and firmer bellies, with HCW accounting for 37.81% of the variability in belly thickness (ß = 0.0272, < 0.001), 20.35% of the variability in subjective flop score (ß = 0.0406, < 0.001), and 10.35% of the variability in IV (ß = -0.1263, < 0.001). Overall, the proportion of variability in loin and ham quality explained by HCW was poor (≤5.60%), suggesting that HCW is a poor predictor of the primal quality of pigs within this weight range. Nonetheless, HCW was a moderate predictor of belly quality traits. The findings of this study suggest that increasing HCW did not compromise loin, ham, or belly quality attributes.

Characterization of variability in pork carcass composition and primal quality,.

The objective was to characterize the factors and production practices that contribute to variation in pork composition and quality. It is possible the variation in pork quality traits, such as color, marbling, and tenderness, contributes to reduced customer confidence in the predictability of finished product quality and, therefore, pork products becoming less competitive for consumer dollars. Pigs raised in 8 different barns representing 2 seasons (hot and cold) and 2 production focuses (lean and quality) were used in this study. Pigs were marketed in 3 groups from each barn and marketing procedures followed commercial marketing procedures. Data were collected on a total of 7,684 pigs. The mivque0 option of the VARCOMP procedure in SAS was used to evaluate the proportion of variation each independent variable (season, production focus, marketing group, sex, and random variation) contributed to total variance. Random variation including inherent biological differences, as well as factors not controlled in this study, contributed the greatest proportion to total variation for each carcass composition and quality trait. Pig and other factors contributed to 93.5% of the variation in HCW, and marketing group, sex, season, and production focus accounted for 4.1, 1.4, 0.8, and 0.3%, respectively. Variation in percent carcass lean was attributed to production focus (36.4%), sex (15.8%), and season (10.2%). Pig and other factors contributed the greatest percentage of total variation (39.4%). Loin weight variation was attributed to production focus (21.4%), sex (5.4%), season (2.7%), marketing group (1.8%), and pig (68.7%). Belly weight variation was attributed to pig (88.9%), sex (4.1%), marketing group (3.8%), production focus (3.0%), and season (0.1%). Variation in ham weight was attributed to pig and other factors (93.9%), marketing group (2.8%), production focus (2.2%), and season (1.1%). Ultimate pH variation was attributed to pig (88.5%), season (6.2%), production focus (2.4%), marketing group (2.2%), and sex (0.7%). Aside from pig (71.9%), production focus (14.0%) was the next largest contributor to variation in iodine value followed by sex (13.2%) and marketing group (0.9%). Variation in carcass quality and composition could be accounted for, but the greatest percentage of variation was due to factors not accounted for in normal marketing practices.

Comparison of variability in pork carcass composition and quality between barrows and gilts.

Pigs ( = 8,042) raised in 8 different barns representing 2 seasons (cold and hot) and 2 production focuses (lean growth and meat quality) were used to characterize variability of carcass composition and quality traits between barrows and gilts. Data were collected on 7,684 pigs at the abattoir. Carcass characteristics, subjective loin quality, and fresh ham face color (muscles) were measured on a targeted 100% of carcasses. Fresh belly characteristics, boneless loin weight, instrumental loin color, and ultimate loin pH measurements were collected from 50% of the carcasses each slaughter day. Adipose tissue iodine value (IV), 30-min loin pH, LM slice shear force, and fresh ham muscle characteristic measurements were recorded on 10% of carcasses each slaughter day. Data were analyzed using the MIXED procedure of SAS as a 1-way ANOVA in a randomized complete block design with 2 levels (barrows and gilts). Barn (block), marketing group, production focus, and season were random variables. A 2-variance model was fit using the REPEATED statement of the MIXED procedure, grouped by sex for analysis of least squares means. Homogeneity of variance was tested on raw data using Levene's test of the GLM procedure. Hot carcass weight of pigs (94.6 kg) in this study was similar to U.S. industry average HCW (93.1 kg). Therefore, these data are representative of typical U.S. pork carcasses. There was no difference ( ≥ 0.09) in variability of HCW or loin depth between barrow and gilt carcasses. Back fat depth and estimated carcass lean were more variable ( ≤ 0.0001) and IV was less variable ( = 0.05) in carcasses from barrows than in carcasses from gilts. Fresh belly weight and thickness were more variable ( ≤ 0.01) for bellies of barrows than bellies of gilts, but there was no difference in variability for belly length, width, or flop distance ( ≥ 0.06). Fresh loin subjective color was less variable ( < 0.01) and subjective marbling was more variable ( < 0.0001) in loins from barrows than in those from gilts, but there were no differences ( ≥ 0.08) in variability for any other loin traits or fresh ham traits. Overall, traits associated with carcass fatness, including back fat depth, belly thickness, and marbling, but not IV, were more variable in carcasses from barrows than in carcasses from gilts, whereas minimal differences in variability existed between carcasses of barrows and carcasses of gilts for traits associated with carcass muscling and lean quality.